What is included in the vacuum packaging machine's consumables?
This is something that every customer who has purchased a vacuum packaging machine must know. Replacing these consumables on time will ensure the normal use of the machine and even extend its use life! Let's take a look at what are the consumables?
1. High-temperature cloth:
a kind of wearing part commonly used between the heating film and the packaging bag of the vacuum packaging machine. Generally, the vacuum packaging machine on the market, the replacement frequency of high temperature cloth is about one week, and the frequency of vacuum packaging machine produced by Xiaokang is 2-3 months, which greatly reduces the waste caused by customers during use. .
2, Heating sheet:
also called heating belt, This is the wearing parts that we often replace in the vacuum packaging machine. The vacuum packaging machine we produce, the heating piece is easy to replace, and the heating piece is galvanized on both sides, so the heating piece is not easy to break. .
3. Sealing strip:
A kind of consumable commonly used in the vacuum packaging machine to seal the vacuum chamber. The sealing strip of the vacuum chamber is kept normal to ensure the normal completion of the vacuum packaging machine, which is a necessary wearing part.
4. Vacuum pump oil:
a kind of consumable commonly used for vacuum pumps in vacuum packaging machines. Generally vacuum packaging machines are in use,The first time is a 200hours replacement, followed by a 500hour replacement of the vacuum pump oil.
5. The solenoid valve should be removed for cleaning every 2-3 months.
Methods as below:
a) remove the solenoid valve;
b) Open the solenoid valve, put the valve seat, valve body, iron core and spring into 90# gasoline and clean it;
c) Blow out the gasoline on each part and install it in the order of assembly (small amount of lubricant should be applied before the iron core is installed);
d) Power-on test, if the valve has strong vibration or strange noise, the valve body should be removed again and the iron core should be rotated at a certain angle before installation, and the power is tested until there is no noise.
The above are several kinds of wearing parts commonly used in vacuum packaging machines. We recommend purchasing them at the equipment manufacturer so that they can be matched with the vacuum packaging machine. Of course, in addition to replacing consumables on time, the cleaning of the machine is also necessary.
If you have any question on the operation or maintanence of the vacuum packaging machine, welcome to inquire us! sale@xiaokangpai.com
